|
Roksan Caspian Integrated Amplifier (M series -1) | Our Price: £1,649.00 | |
|
Overview
Transparency and clarity, pin sharp imaging, dynamics and timing' are the brief for this amplifier. This state of the art micro processor controlled 85w/channel power house uses superior quality components combined with an intricate circuit lay out on dual mono designed modules. This allows the amplified signal to be as pure as possible with a wide bandwidth and very low distortion. Each section of the circuit board topology is designed to provide optimum performance. The high quality motorised potentiometer avoids any imprint on signal and allows fine volume control.
The excellent built in protection circuitry puts the amplifier into automatic standby and self test mode if the system is inadvertently shorted. The micro processor and logic controls are on a separate circuit board mounted behind the front panel and away from the amplifier section. Powered by its own dedicated regulators, optimum isolation between logic and music signals is achieved.
The Caspian handles the music with superb composure and control. Its midrange remains solid at all times whilst the lower frequencies have bags of punch to produce a deeper and tighter bass.
Terrific definition runs across the frequency range helping to dig up the subtle detail that most amps simply miss.
This amplifier is designed and built to a specification suitable for use with the best available source and loudspeaker components. Technical Details
| Line Inputs | 5 plus Tape | | Input Impedance | 47 kΩ | | Input Sensitivity (70W) | Line 240mV | | Line Outputs | Tape, Preamplifier (x2) | | Output Voltage | 240mV (Tape Out) 700mV (Pre Out) | | Power Outputs | Loudspeaker, L & R | | Output Power | >85 Watts, into 8Ω both channels driven >120 Watts, into 4Ω both channels driven | | Power Supply | 350VA Ultra Low Noise Toroidal Transformer 4 Regulated Supply Rails | | Current Output | 50 Amps Peak to Peak | | Damping Factor | >140 (8Ω) | | Frequency Response | -3dB, <1Hz – 90kHz | | Gain | 40dB Overall (Pre & Power) 9.3dB Preamplifier 30.7dB Power Amplifier | | Harmonic Distortion | 0.002% 1kHz, 0.015% 20kHz 10W - 8Ω 0.0025% 1kHz, 0.03% 20kHz 50W - 8Ω | | Signal to Noise Ratio | Line 108dBa (ref. 500mV) 85dBa (ref. 1W, 8Ω) | | Power Source | 100V – 120V 50Hz / 60Hz 220V – 240V 50Hz / 60Hz (via Mains inlet filter) | | Power Consumption | < 230 W | | Dimension | 432 x 330 x 70 (W x D x H) mm 432 x 330 x 80 (including feet) | | Weight | 12 Kg |
Customer Reviews Write an online review and share your thoughts with other shoppers!
|
|
|
|
|